Control Unit
OSE-C 2324
VITECTOR Measuring Tools & Sensors Surface Mounting, 24 V AC/DC, 2, 3-Wire, , Safety Cat. 3 PL d (EN 13849-1), Relay NCC, , Stop Output (NCC) & Reverse Contact (NOC) Available 0
| Type de boîtier | Surface Mounting |
| Type d'entrée de barre palpeuse | 3-Wire |
| Sorties | Relay NCC |
| Housing Type | Stop Output (NCC) & Reverse Contact (NOC) |
| Tension d'alimentation | 24 V AC/DC |
| Température de fonctionnement | -20 °C to +55 °C (-4 °F to 131 °F) |
| Poids | 0.36 kg |
| Matière du boîtier | Polycarbonate |
| Indice de protection | IP65 |
| Dimensions du boîtier | 130x94x60 mm (5.11x3.7x2.36") |
| Consommation d'énergie | 7 VA |
| Facteur de marche | 100% |
| Nombre d'entrées de barre palpeuse optique | 2 |
| Propriétés de sécurité | Safety Cat. 3 PL d (EN 13849-1) |
| MTTFd | 44 years |
| Taux de couverture des tests de diagnostic | 88 % |
| Housing Type | NCC Relay |
| Matière du contact | Hard Silver, AgNi |
| Housing Type | 250 V AC/DC |
| Housing Type | 4 A |
| Housing Type | 4 A |
| Housing Type | 1000 VA |
| Housing Type | 10 x 10^6 operating cycles |
| Housing Type | 4 A slow acting (not part of the unit) |
| Housing Type | Relay NOC |
| Matière du contact | Hard Silver, AgNi |
| Housing Type | 250 V AC / 24 V DC |
| Housing Type | 6 A |
| Housing Type | 6 A |
| Housing Type | AC15: 230 V / 2 A; DC13: 24 V / 3 A |
| Housing Type | 20 x 10^6 operating cycles |
| Housing Type | 6 A slow blowing (not part of unit) |
| Housing Type | Relay NCC |
| Matière du contact | Hard Silver, AgNi |
| Housing Type | 250 V AC / 24 V DC |
| Housing Type | 6 A |
| Housing Type | 6 A |
| Housing Type | AC15: 230 V / 2 A; DC13: 24 V / 3 A |
| Housing Type | 10 x 10^6 operating cycles |
| Housing Type | 6 A slow blowing (not part of unit) |
| Unit of Measure | Pièce |
| Cycle de vie des produits | Established |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© CEDES AG., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.