The FLASHENTRY unit is mounted with the mounting screws at the inside of the door. The light sensors can be mounted at the outside of the door. For the installation execute the following steps:Find out the height of the car light spotThe light sensor must be adjusted to the height of the car head lights, which are to activate the FLASHENTRY unit.As a default value you can use a height of 50 to 60 cm for limousines. For trucks or sports cars this value can change plus or minus 30 cm. The sidewise offset is about 50cm from the center of the lane according to the generated light spot from the car.In case of doubt regarding the mounting position of the light sensor, check the position of the light spot at the door with a test car.
